Exports Keep China’s Heavy-Truck Sector Rolling: October Overseas Sales Up ~20% as Sinotruk Maps a Million-Unit Global Market

Cover image: Chinese heavy trucks boarding a Ro-Ro vessel at an export port (AI-generated illustration for this article, not a photograph)

Domestic demand is cooling, but the export engine keeps China’s heavy-truck industry moving. October 2026 wholesale volume fell about 13% year on year to roughly 92,000 units — yet exports held at around 40,000–44,000 units, up about 20%, keeping full-year overseas shipments on course for 450,000–460,000 units (+35%). In the past week, Sinotruk used a landmark investor open day to project a million-unit overseas market by 2030, FAW Jiefang signed a 3,000-vehicle Gulf framework deal and delivered its first trucks to DP World in Dubai, and SHACMAN pushed CNG and premium tractor models deeper into Nigeria and Malaysia.

October data: the domestic slide deepens, exports become the floor

China’s heavy-truck market sold approximately 92,000 units in October 2026 (wholesale caliber, including exports and new-energy vehicles), down about 7% month on month and about 13% year on year — the fifth year-on-year decline of 2026 and the fourth consecutive monthly drop, according to First Commercial Vehicle Network (cvworld.cn) and Zhejiang Securities’ monthly tracking note. Cumulative sales for January–October reached about 1.021 million units, up roughly 10% year on year, a pace that has slowed from +13% for January–September.

The domestic side remains under pressure: terminal sales of about 62,000 units in October were down roughly 12% year on year, weighed down by weak freight rates, the hangover from July’s AEBS regulation switch, industry destocking, a high year-ago base from the truck trade-in program, and rising diesel and LNG prices. October’s manufacturing PMI of 49.3% (down 0.8 percentage points) added to the gloom.

Exports, by contrast, were the standout: roughly 40,000–44,000 units shipped in October, up about 20% year on year, pulled by Africa, Southeast Asia, Latin America and Central Asia. Brokerage estimates put January–October cumulative exports at about 460,000 units (+35%) and the full year at 450,000–460,000. New-energy heavy trucks also stayed hot domestically — terminal sales of about 34,000 units in October, up nearly 70% year on year, with monthly penetration near 55% for the second straight month above 50% — while natural-gas heavy trucks fell about 68% to around 6,800 units as LNG prices climbed.

Indicator (October 2026)FigureYoY change
Heavy-truck wholesale volume~92,000 units−13% (−7% MoM)
Heavy-truck exports~40,000–44,000 units≈ +20%
Domestic terminal sales~62,000 units≈ −12%
NEV heavy trucks (terminal)~34,000 units≈ +69% (penetration ~55%)
Natural-gas heavy trucks (terminal)~6,800 units≈ −68% (penetration ~11%)
Jan–Oct cumulative sales~1.021 million units≈ +10%
Jan–Oct cumulative exports (broker est.)~460,000 units≈ +35%

By manufacturer, Sinotruk led October with about 28,000 units (flat YoY) and holds ~29.9% of the year-to-date market with roughly 305,000 units (+20%) for January–October — ranking No.1 in both total and export sales. FAW Jiefang stayed second at about 17,000 units; SHACMAN (~13,000), Foton (~12,000) and Dongfeng (~11,000) all topped five figures, while XCMG grew about 38% against the market to about 5,400 units.

Key takeaway: Exports have shifted from “growth driver” to “floor price” for the industry — without the ~20% October export growth, the domestic four-month decline would have dragged the whole market far lower. OEM strategy is now explicitly built around overseas scale, localization and new-energy products.

Sinotruk: 21 years as export champion, and a 2030 map that points at one million units

At the Shandong Heavy Industry Group 2026 Investor Open Day in Jinan (November 2–3) — the group’s first group-wide capital markets event — Sinotruk (CNHTC) disclosed that its January–September global sales reached 390,000 vehicles (+19.3%), with international sales of 182,000 units, up 52% year on year and a 21st consecutive year as China’s No.1 heavy-truck exporter. New-energy heavy-truck sales rose 139% to 37,000 units, taking the domestic No.1 market share, and group-wide NEV heavy-truck sales passed 70,000 units for January–October.

The forward guidance was the real headline:

  • 2026 heavy-truck exports are expected to exceed 200,000 units, with overseas localized production approaching 50,000 units.
  • By 2030, Sinotruk targets 800,000 vehicles and revenue above 300 billion yuan, and forecasts the total overseas addressable market for Chinese heavy trucks at about one million units a year by 2030 — up from a ~700,000-unit addressable space today.
  • Management said Chinese-brand share of the African heavy-truck market has climbed from 80% in 2024 to about 89% this year, Southeast Asia from 48% to about 70%, and Latin America (ex-Brazil) from 24% to about 40% — while African demand itself has grown from ~120,000 units (2024) toward an estimated 200,000 units in 2026.
  • Sinotruk has begun batch entries into high-end markets such as Australia and New Zealand, and is cooperating with Austria’s Steyr on localized production in Europe.

Listed-entity results back the story: Sinotruk’s A-share truck company reported nine-month revenue of 53.50 billion yuan (+32.1%) and net profit of 1.44 billion yuan (+37.2%); September exports alone were about 19,000 units (+29.1%), meaning exports now account for more than half of its total sales across 150-plus countries. At group level, Shandong Heavy Industry expects 2026 export revenue above 125 billion yuan (after 94 billion yuan, +29.3%, in January–September) and is targeting a doubling of product-export revenue to more than 200 billion yuan under its 2030 plan.

FAW Jiefang: a 3,000-vehicle Gulf framework and a first delivery to DP World

FAW Jiefang concentrated its Gulf push into a single week. On November 2 in Dubai, it signed a 2027 West Asia strategic framework agreement with the Al-Futtaim Group covering 3,000 commercial vehicles — spanning trucks, power-generation units and a regional marketing-and-service build-out, focused on port logistics, construction and trunk-line transport. Al-Futtaim is one of the Middle East’s largest family conglomerates and a long-time distributor for Toyota, Lexus and BYD. The deal was confirmed by Shanghai Securities News (China Securities Journal network) citing the company.

One day later, on November 3, FAW Jiefang held a key-account award ceremony with DP World in Dubai and handed over the first batch of 160 Jiefang heavy trucks, which will enter port container-haulage and related logistics operations. The two sides said they will use the UAE as a starting point to expand cooperation across DP World’s network of 60-plus ports in 85 countries. This follows the first batch of 210 trucks shipped to the UAE in late October — the brand’s first volume delivery in that market — and management told investors that its Saudi Arabian subsidiary is now operational, subsidiaries in Uzbekistan, Indonesia and Vietnam are registered, and overseas KD assembly plants will follow under the “SPRINT 2030” internationalization strategy.

SHACMAN: green and premium models push into Africa and Southeast Asia

SHACMAN (Shaanxi Automobile) kept up its two-track pace of green exports and premium segment entry:

  • Nigeria: SHACMAN Import & Export completed a batch delivery of natural-gas heavy trucks custom-developed for local road conditions and gas supply, with full lifecycle after-sales support — a further step in its African green-freight push (trade-portal report, see source assessment).
  • Malaysia: ten X5000 6×2 460hp tractors were delivered for refined-fuel (hazmat) transport, marking SHACMAN’s entry into Malaysia’s high-end dangerous-goods logistics segment.
  • Indonesia: trade-media reports again pointed to the 200-unit heavy-truck order signed with a local dealer on October 29 (previously noted; still single-sourced via dealer-style information sites).
  • Exports by the numbers: international sales reached 54,000 units in January–September, up 33%, over 40% of group volume, with cumulative overseas sales above 450,000 units across 160-plus countries; nine-month export sales were about 13.5 billion yuan (+13.4%). In 2025 SHACMAN put hydrogen fuel-cell heavy trucks into Australia and won an electric refuse-truck tender in Uzbekistan.

Logistics is easing too: since Xi’an’s Guanzhong comprehensive bonded zone took on SHACMAN tractor exports in June 2026, more than 260 million yuan of outbound vehicles have cleared with “bonded storage + consolidated declaration” facilitation, cutting batch gate-exit time by roughly 70% — a reminder that export throughput now depends as much on trade facilitation as on factory capacity.

New energy goes offshore — and the market map is being redrawn

October’s events underline three structural shifts. First, new-energy heavy trucks are no longer a domestic-only story: with monthly penetration near 55% at home and NEV exports (battery-electric and CNG tractors) scaling in Africa, Southeast Asia and the Gulf, powertrain leadership is becoming an export selling point. Second, market share is consolidating fast — Chinese brands now hold ~89% of Africa and ~70% of Southeast Asia per Shandong Heavy Industry’s own figures, meaning competition is shifting from “China vs. others” to “Chinese OEM vs. Chinese OEM,” with localization, financing and service networks as the tiebreakers. Third, deals are getting structurally deeper: FAW’s Al-Futtaim framework bundles vehicles, gensets and service infrastructure; Sinotruk’s 2030 plan is built on local production; Foton’s Africa conference (late October) paired 1,800 truck deliveries with manufacturing and financing agreements. For overseas buyers, the practical consequence is more negotiating leverage on delivery windows, financing and parts support than at any point in the past decade.

What it means for international buyers

  • Anchor the caliber before comparing numbers: “92,000 units” is a wholesale figure including exports and NEVs; export figures (~40,000–44,000 for October) come in both brokerage-estimate and customs/HS-code calibers. Always ask which caliber a supplier is quoting.
  • Gulf and ASEAN coverage is widening: with FAW tied into Al-Futtaim’s dealer network and DP World’s ports, and Sinotruk/SHACMAN scaling localized assembly, parts availability and financing in the Middle East and Southeast Asia are improving — verify the local service footprint before signing.
  • Green tractors are now export-proven: CNG trucks in West Africa, EV models across ASEAN and hydrogen units in Australia mean buyers can demand application-specific references (fuel/charging infrastructure, acceptance criteria, uptime guarantees) rather than pilot promises.

Retour en haut de la page